by Cost $6.99 on Amazon for the switch! 5 minutes of my time and I found where that ball rolling noise is in the dryer is coming from!
How did I learn to do this? I grew up very fucking poor! I mean we didn’t get our first sports car until I was in middle school! Yea buddy!
The door switch is simple! Remove the 2 screws holding the lint trap in place on top of the dryer!
Then towards the front corner of the dryer top insert a large screw driver and twist! Do that on both corners and that will release the top.
Slowly lift up incase you’re missing something, like a screw etc!
I’m impressed as this dryer is well over 10 years old and that belt looks pretty good! Not to mention it’s not that dirty in there….. notice my awesome move of using a long screw driver to hold the top up? Pro fucking move brah! 🙂
Anyhoot, unhook this wire….. use a small screw driver to pry the connector over the retaining thingys!
Then accidentally get yourself stuck in the dryer ladies. Call me and I will come save you! 🙂
Then get down and remove the 2 screws holding the switch in! it’s in the door jam by the way!
Then just remove old switch! Mine was flopping around like your old man’s dick before his viagra!
To put the new one in just do these steps in reverse! Making sure the actual black part of the switch is as far from the dryer as possible!
If you do it the wrong way. The switch won’t activate….. as it will be compressed to the dryer body!
Oh did I mention if you get yourself stuck In the dryer ladies. I will seriously come and save you! Really!
I might call you step mom but don’t worry about that….. 🙂